Banner-Day

Storage Tanks

Storage tanks can be heated by several means, including TraceFREE® electric impedance heating and several other technologies. The tank heating technology selected for a given application is dependent on the product or material being heated, temperature requirements, tank design, and system and plant layout. Banner-Day Pipe Heating will assist you with selecting a tank heating system to best meet your application needs.

3a-adjustable-image002Banner-Day Pipe Heating Adjustable Tank Hotwell

The Adjustable Hotwell is used in conjunction with a TraceFREE® impedance pipe heating system to heat a storage tank with an external tank heating source. Designed for use in systems that utilize continuous flow through a return line, these systems are easier to install in the tank than an internal tank heating systems.

Automatic Tank Heating & Control Package

The Automatic Tank Heating and Control Package is a stand-alone tank heating system. Excellent for maintaining precise temperatures in any size tank, the system does not require a return flow or pipe heating system. This system can be designed with a wide range of watt densities to heat even the most temperature sensitive materials.

Benefits

Banner-Day Pipe Heating systems maintain or raise the temperature of storage tank materials while providing precise temperature control utilizing watt densities as low as 3 watts/square inch over a large heating surface. The system is ideal for temperature sensitive materials. Higher or lower watt densities are achievable when needed for other materials.

Automatic Tank Heating and Control Packages are designed for your specific application and are ready for installation when delivered. High quality components and rugged construction provide long term, low maintenance, reliable service.

For more information, contact us.

What is a TraceFREE® Electric Impedance Pipe Heating system?

TraceFREEImpedancePipeHeatingGraphicGreyBkgdThe Banner-Day Pipe Heating TraceFREE® Electric Impedance Pipe Heating (IPH) system is designed to heat carbon steel, galvanized steel, stainless steel, or exotic metal pipe or tubing to maintain or increase the temperature of a product or material flowing through a piping system. With TraceFREE® impedance pipe heating product in a pipe can be thawed from a solid product and heated it to a desired operating temperature, gradually increase product temperature as it moves thru the pipe, or maintain a constant product temperature as the product is transported. The Banner-Day Pipe Heating TraceFREE® electric impedance pipe heating system provides operational flexibility to companies by allowing intermittent or continuous pipe heating and process operation.

 

TraceFREE® utilizes low voltage electricity (typically < 50 VAC) to heat the piping system. Pipe and product temperatures can be maintained from ambient to in excess of 1400°F with tight tolerances.

How does TraceFREE® Electric Impedance Pipe Heating work?

A Banner-Day Pipe Heating TraceFREE® Electric impedance system uses a low AC voltage to cause electric current flow through the piping to be heated. The secondary side of a dual wound isolated impedance system transformer is connected to a piping system, installed to be isolated from earth ground, using cable conductors connected to high strength cable lugs attached to the two ends of the impedance heated pipe.

As depicted in Fig. 1, low voltage AC current flows from the first transformer connection point (located by the tank) through the pipe to the cable lug located at the use point. The current bypasses the inline pump, isolated from impedance system current by two dielectric Insulated Pipe Joints (IPJ’s) and a bypass jumper cable. From the cable lug at the Use Point in Fig. 1, the impedance system current flows back through the return cable conductor to the TraceFREE® impedance system transformer. This transformer is grounded at the return cable conductor connection to provide a zero voltage reference for the system.

The system is controlled from the TraceFREE® control panel that manages the input power to the impedance transformer by sensing the pipe and or product temperature with a RTD temperature sensor. The RTD is typically welded to the outer surface of the heated pipe allowing the pipeline and product temperature to be maintained at the desired set point temperature.

Typical Products Handled:

Chemical Products Manufacturing Products Food Ingredients
Asphalt Glues / Adhesives Chocolates
Fuel Oils Waxes (Paraffin, Elvax, others) Shortenings
Petroleum Products Monomer Corn Syrup
Caustic Soda Gortex® Liquid Sugars
Coal Tar Pitch Lead HFCS
Varnishes   Oils
Gases & Vapors   Peanut Butter
Potassium    
Sodium    
Water    

Contact Banner-Day Pipe Heating for your specific product application

Advantages of TraceFREE® Electric Impedance Pipe Heating:

  • Even heat distribution – No Hot or Cold spots!
  • Low watt densities
  • Reduced process startup times
  • Minimal maintenance requirements
  • No heating elements or heat tape under pipe insulation
  • Low operating costs
  • System application flexibility
  • Reduced piping costs

System Types There are two types of Banner-Day Pipe Heating TraceFREE® Electric pipe heating systems:

 

The TraceFREE® end feed system is the most common and is used with piping systems that have several branches. Excellent for both low- and mid-range temperatures, an end feed system is easier to install than a center feed system.

The TraceFREE® center feed system is used for longer systems typically without branch lines, and is best for mid-range and high temperature applications. It does not require insulated pipe joints or flange gaskets.

For more information, contact us.

TraceFREEImpedancePipeHeatingGraphic GreyBkgd2Are you challenged with moving viscous temperature sensitive materials?
Do you have any of these situations?

  • Need to maintain constant elevated temperature from one point in your piping system to another?
  • Need to raise the temperature of your material as it passes through the pipe?
  • Need to raise the product from a standby temperature to an operating temperature within a defined time period?

If you have these or any related concerns or requirements, you should consider a TraceFREE® Electric Impedance Pipe Heating solution from Banner-Day Pipe Heating.

For more information click here.

Materials flow easily through pipe with use of a Banner-Day Pipe Heating TraceFREE® Electric Impedance Pipe Heating system. The pipe heating system is engineered so the piping itself serves as the heating element, heating pipe and tubing made from:

  • stainless steel
  • carbon steel
  • galvanized steel
  • exotic alloys

Built to NEC, NFPA and IEEE standards, the electric impedance pipe heating system is designed with temperature controls that preheat and maintain pipe temperatures from ambient conditions to as high as 1400° F and higher.


Whether you’re transporting asphalts, oils, soaps, sugars or other viscous materials, a TraceFREE® impedance pipe heating system can handle the application. Material can be liquid or vapor phase.

  • Heat from ambient to product use temperature.
  • Increase product temperature as it moves through the pipe.
  • Maintain product at a constant temperature throughout a length of the pipe.

With minimal preventive maintenance, the reliability and dependability of a Banner-Day Pipe Heating TraceFREE® Electric Impedance Pipe Heating system ensures a stable pipe heating performance with minimal life cycle cost.

overview-image-piping
Impedance pipe heating system providing freeze
protection to -50° F, heating inlet pipes in Western Canada. Remote temperature legs.

Storage Tanks

storage-tanksStorage tank heating systems are also available using methods customized for your application. The tank heating method best suited for your application depends on several variables, including:

  • Material being heated
  • Temperature requirements
  • Tank design
  • System and plant layout

Our application engineering and sales department will help you select the appropriate storage tank heating system to meet your needs and specifications.

For more information, contact us.